BREB Online Connection System: Palli Bidyut Meter Application 2026

• In the BREB Online Connection System, you need to pay 138 Taka to submit the application. If you want a new rural electricity meter, you must apply through the BREB online connection system.

During the application, you have to upload some documents. These include your photograph, NID card, and land certificate.

After you submit the application, BREB checks all the information within a few days. If everything is correct, they provide the new meter connection within a few days.

If you already know about the Desco New Connection Online Application 2026 Processes ,then this post guide will be easier to you.

About BREB Online Connection System

BREB means Bangladesh Rural Electrification Board. It is called Bangladesh Palli Bidyut Connection Board also.

People who move into a new house need to apply for a new electricity meter. Now everything is online, so you can apply for an electricity connection through the internet.

Going to the electricity office to apply takes a lot of time and money. It is also very troublesome. To avoid these problems, you can apply for a new electric meter online from your home.

Before applying, you must collect some important documents. After you have all the documents, you can submit your application online.

The full step-by-step process is explained below. By following these steps, you can easily apply for a new meter through the BREB Online Connection System.

BREB Online Application Requirements

For the BREB Online Connection System or rural electricity new meter application, you must know what information and documents are needed.

The following things are required to apply for a new meter:

1. Applicant’s name and mobile number
2. Applicant’s National ID card number and permanent address
3. Address where the electricity connection will be taken
4. Land ownership details, plot number, and Khaitan number of the place where the meter will be installed
5. Account number of a nearby customer under the same transformer (from where the connection will be given)
6. Distance from the nearest service pole to the house (in feet)
7. List of electrical loads in the house – such as lights, fans, TV, fridge, sockets, etc.
8. Applicant’s photo, National ID card, and land owner’s certificate (if the applicant is not the land owner)
9. Photo of the ground rod cash memo to confirm house wiring

Please collect all these documents and information before applying. After that, follow the application process given below.

BREB Online Meter Application Step-by-Step Process

Now let’s go to the main part. In this section, we will learn how to apply online in the BREB Online Connection System. Follow the steps below carefully to apply for a Palli Bidyut meter online.

• To apply for a new rural electricity meter, visit the BREB Online Connection System website.
• After opening the website, you will see a dashboard.
• From the top menu, click on the “Application” option.

• Then click on the “Apply for New Meter” button.
• After clicking this option, an application form will open.

Details of Electricity Office

The first part of the form is about electricity office details.

• The first box is “Samiti Name.”
• You need to select the Samiti name from which you want to get the electricity connection.
• If you do not know the Samiti name, ask any electricity user in your area. They can tell you from which Samiti they received their connection.
• Next is the “Zonal Office.”
• Here you also need to select the correct Zonal Office name.
• If you do not know this, you can ask any nearby electricity customer to find out the correct information.

Connection

• Now go to the “Connection” section.
• Here you will see an option called Connection Tariff.
• Click on it to see different options.
• If you want an electricity connection for your home, you must select “LTA Abasik.”
• If you need a connection for another purpose (like business or other use), choose the correct option for that purpose.

Applicant Details

• In the Applicant Details section, you need to give important information.
• First, write the applicant’s name in Bengali.
  Then write the father’s name, mother’s name, and husband’s/wife’s name in Bengali, according to the NID card.
• After that, write the date of birth in English.
• You also need to provide:

1. National ID card number
2. Mobile number
3. Email address
4. Nationality
5. Gender

• All fields marked with a red star (*) are required. You must fill those.
• If there is no red star, it is optional. But it is better to fill all information if possible.
• Permanent Address and Proposed Electricity Connection
• In the Permanent Address section, you must fill in all details correctly.
• You need to enter:

1. District
2. Upazila
3. Union
4. Post Office
5. Post Code
6. Village or Mahalla
7. Road Number
8. House Number
9. Holding Number

• Fill in everything carefully and correctly.
• Below this, you will see the Proposed Electricity Connection section.
• Here you must enter the address where you want to install the electricity meter.
• If you want the meter at your permanent address, there is an option called
  “Use as address at the proposed electricity connection.”
• Put a tick mark in this box if you want the meter to be connected to your permanent address.

Geographic Information

Be very careful when filling in the Geographic Information section. You may need to ask a nearby electricity customer for this information.

• First, enter the distance from the nearest service pole.
• This means how far your house is from the nearest electric pole (in feet).
• Next, there is an option called “Nearby customer’s book number under the same transformer.”
• Here, you need to write the book number of any electricity user near your house.
• Then write that customer’s meter number in the box below.
• On the right side, you will also need the account number and phone number of that nearby customer.
• You can collect this information from them.

Connection Details, Load, and Demanded Load

• In the Connection Details section, there is an option called Application Type.
• You will see three options here.
• If you want a permanent connection, select Permanent Connection under the Connection Type.
• After that, fill in all the required information correctly.
• Now go to the Load section.
• Here you must enter details about the electrical items you will use in your house.
• For example: TV, Lights, Fans, Refrigerator, and Other electronic devices
• You need to write how many of each item you will use.
  When you select items like TV, fridge, or lights, the total load will be added automatically.
• In the Demanded Load section, there are three options: Total Load, Phase and Voltage
• The total load will be calculated automatically when you add your items.
• But you must select the phase and voltage yourself.
• For normal home use, select Single Phase and choose 230 volts as the voltage. This is best for home electricity.

Location of Home or Establishment and Comments

• In this section, you can write extra details about the location of your house or organization.
• If you have something important to mention, write it clearly.
• If you have nothing to write, you can leave it empty. There is no problem.

Document Upload

• After filling in all the information, go to the Upload Documents section.

• Here you need to upload scanned copies of your:

1. Photograph
2. National ID card
3. Other required documents

• You will see the maximum file size (in kilobytes) written on the right side. Make sure your files are within that size limit before uploading.
• After uploading the documents, you will see a line that says: “I agree to the below-mentioned terms of service of Palli Bidyut Samiti.”
• Put a checkmark in the box on the left side to agree.
• Then enter the Captcha code in the given box and click on the Save button.
• After this, your online application will be submitted successfully for the first stage.
• Once the application is completed, print a copy of the application form.
• You will get a tracking number and a PIN on the form. You will need these later.
• So, print the form. If you cannot print it now, download it and print it later from another place.

House Wiring Confirmation for Palli Bidyut Meter Application

Before getting a BREB online connection or a rural electricity meter, your house wiring must be confirmed.

You need to upload a house wiring memo as proof that the wiring in your house is completed.
This is required before they connect electricity to your house.

You should upload the purchase memo for all the items you bought for house wiring in this section of the application.

Follow these steps to confirm house wiring:

• Go to the BREB Online Connection System website.
• Click on the “Confirm House Wiring” button under the application menu.

• You will see a place to enter your tracking number and PIN from your application form.

• Enter the tracking number and PIN, then click Submit.
• After this, your house wiring will be confirmed.

BREB Online Connection Application Fee

To apply for a BREB online connection or a new rural electricity meter, you need to pay an application fee of 138 Taka.

Paying the fee is necessary to complete your application successfully. Follow the steps below to know how to pay the fee.

BREB Online Application Fee Payment Guide

You can pay the application fee in two ways:

• Go directly to the electricity office – This is simple and has less chance of problems.
• Pay online – For this, you need a Rocket account.
• If you have a Rocket account and want to pay online, follow the instructions below to complete the payment.
• Once the fee is paid, your application will be successfully completed.

Here is the process of BREB online connection application fee payment:

1. On the home screen, go to the “Services” section and tap on Bill Pay.
2. At the top, you will see a search bar. Type 6070 (Biller ID). Then select Palli Bidyut Application Fee from the list.
3. Enter your Ref/Bill Number (this is the Tracking Number you got by SMS). After typing it, press the VALIDATE button.
4. Check the payment details. The fee is usually 138.00 BDT plus a small service charge. Enter your PIN. Then tap and hold the Rocket logo button at the bottom to confirm the payment.
5. After successful payment, you will see a digital receipt. Write down the Transaction ID or save the receipt for future use.

How Long Does It Take to Get a New Palli Bidyut Electricity Meter?

Usually, a new Palli Bidyut meter is connected within three months after submitting the online application.

After you apply online, the BREB office will accept your application and then visit your house to check everything.

If everything is correct, BREB will install your new meter within 3 months. Sometimes it may take longer, so you need to be patient.

BREB Contact Number

If you face any problems with the BREB Online Connection or Palli Bidyut Meter application, you can contact them using the information below:

• Bangladesh Rural Electrification Board
• Address: Head Office, Nikunja-2, Khilkhet, Dhaka-1229
• Telephone: 88-02-8916424-28, 8900331, 8900335
• Fax: 88-02-8900611
• Website: www.reb.gov.bd

FAQs – BREB Online Application

Many people have questions about the BREB Online Application or Palli Bidyut new meter application. Here are some common questions and answers.

Is it possible to get a Palli Bidyut meter within 1 month?

Normally, you have to wait at least 3 months to get a new rural electricity meter. If someone needs the meter urgently, they must contact the BREB office directly.

What should I do if the meter is late?

Sometimes, the meter may take more than 3 months, 6 months, or even a year to arrive.

This can happen if there is a mistake in your application or some other issue. In such cases, you should contact your local Palli Bidyut Samiti office to resolve the problem.

Can I pay application fee by visiting the office?

Yes, you can definitely pay the application fee by visiting the Palli Bidyut office. You must bring the application copy and other information when visiting the office.

Final Words

In this guide, we have explained everything you need to know to apply for a Palli Bidyut meter through the BREB Online Connection System.

If you follow these steps, you will be able to apply online for a new Palli Bidyut meter very easily.

If you face any problem with the BREB Online Connection System, you can leave a comment. We will try our best to help you with the information.

Read More:

• How to DPDC Bill Check Online 2026: Step-by-Step Guide